…
Parquet flooring in Kragujevac – sanding, finishing and installation
Sanding, finishing and installing parquet in Kragujevac and the surrounding area. Describe the condition of your floor and its area — the enquiry is used to understand the work before a contractor is contacted.
Kragujevac · Batočina · Lapovo · Topola · Knić · Rača
How the site helps
An enquiry described in photos
A photo of the whole room and one close-up show whether sanding alone is likely to be enough or whether repairs have to come first. That makes the enquiry clearer to the contractor who takes it on.
Kragujevac and the surrounding area
Enquiries are collected for the city and the nearby towns. If you are unsure whether your location falls within that range, name it in the enquiry.
What to ask a contractor
The service pages explain the order of the work, drying times and what moves the price — so the conversation with a contractor starts from the right questions.
The agreement is direct
The price, the scope and the date are agreed directly with the contractor. The site is not a party to that agreement and does not set its terms.
The work
Five groups of work cover nearly everything a floor needs in a flat or a house. Each page explains the process, what drives the price, and when the service is not the right answer.
Floor sanding
P40 → P120Removing the old finish and the worn layer of timber down to sound wood, levelling the height differences between staves.
Parquet flooring services in KragujevacLacquering and oiling
2–3 coatsThe finish coat decides how the floor looks, how much it slips and how long it lasts before the next renovation.
Parquet flooring services in KragujevacParquet installation
≤ 2% CM moistureInstalling solid and engineered parquet, including subfloor preparation and the checks that must precede it.
Parquet flooring services in KragujevacRepair and restoration
from 1 staveReplacing damaged staves and fixing open gaps, squeaks and loose spots without renovating the whole floor.
Parquet flooring services in KragujevacLaminate installation
≤ 3 mm / 2 mFloating laminate installation with underlay, expansion gaps and skirting, over a properly levelled subfloor.
Parquet flooring services in Kragujevac
Why the timber comes before the price
A price per square metre means nothing until it is clear what the floor needs. The same square metre costs differently if the finish is thin and the floor flat, or if half the staves move and have to be refixed first.
So the first step is not a price but a look at the floor. Two photos usually reveal whether the issue lies in the finish, in the timber, or in the subfloor beneath it — and that is the difference between renovation and replacement, and the first question a contractor answers.
Whatever a photo cannot show stays an unknown until an inspection on site. A flat rate covering every possible outcome serves nobody.
What sanding changes
Drag left and right across the image. On the left a worn floor, on the right the same framing after sanding and a fresh finish.
BeforeAfter
How it works
You send an enquiry
A photo of the room, one close-up, and the approximate area. If you know whether the floor has been sanded before, that is the single most useful detail.
2 photos
The enquiry is understood and sorted
The description and photos show what kind of work is involved — sanding, repairs before sanding, or replacement. Nothing is promised as a price at this step.
Connection once a contractor is available
When a suitable independent contractor is available, a connection can be made. You will be informed before the details of your enquiry are sent to a contractor.
Agreement with the contractor
The contractor inspects the floor, gives a price, agrees a date and carries out the work. Scope, deadlines, materials and any complaint go to them.
What drives the price
The cost of parquet work is not a single figure per square metre. The same square metre costs differently depending on what the floor needs before the finish is even reached.
The price list is not published yet
Any prices or ranges shown, where they exist, serve only as orientation. The final price is set by the contractor after assessing the type, scope and condition of the floor — the site does not set prices and does not make offers.
- Area and the number of separate rooms.
- Thickness and hardness of the old finish — old solvent-based lacquers need more passes.
- Number of staves that move, squeak or need replacing before sanding.
- Timber species; harder species sand more slowly.
- Choice of finish and the number of coats.
- Whether skirting is removed, refitted or replaced.
- Floor level and access when machines must be carried up without a lift.
Common questions
How long do sanding and finishing take?
It depends on the area, the condition of the floor and the finish chosen. What cannot be shortened is the drying time between coats — that is set by the finish manufacturer and shifts with room temperature and humidity. The contractor confirms the schedule, and when the room can be re-entered, before work starts.
Does sanding create a lot of dust?
Machines with dust extraction capture most of it, but fine dust still settles around the space. Sensitive items should be moved or covered and doors to the rest of the flat kept closed. The floor is vacuumed thoroughly before finishing, because even the smallest particles stay visible under the coat.
When can you walk on a newly finished floor?
Walkability and full cure are two different times, and both are set by the finish manufacturer. The floor can be walked on well before rugs and heavier furniture may return. The contractor confirms exact figures for the chosen product before work begins.
Can just the damaged section be repaired?
Yes, when the rest of the floor is sound. Expect the replaced area to stay noticeable for a while on an older floor, because the surrounding timber has darkened under light for years.
What drives the price?
Area, the condition and thickness of the old finish, the number of staves needing repair, the timber species, the choice of finish, and access to the building. The final price is set by the contractor after assessing the floor — the site does not set prices.
Does the furniture have to come out?
Yes. The machine has to cover the whole surface, and the finish needs to dry with nothing resting on the floor. Working room by room is possible with furniture moved between them, but it extends the job.
How many coats are applied?
As a rule a primer and one or two finish coats. The final number depends on the product and how heavily the room is used — a hallway or kitchen justifies an extra coat where a bedroom does not.
Does this site carry out the work?
No. ParketarKragujevac.rs collects enquiries and exists to connect people with independent contractors, when a suitable contractor is available. The work is carried out by that contractor, who agrees the price, the date and the terms with you.
How do I send photos of my floor?
Through the channel listed in the header and at the foot of the page. Two photos are the most useful: the whole room in daylight and one close-up of the damage, plus the approximate area. The photos serve to describe the work more precisely.